Dual-colour silk finish in Black & Blue | Compatible with 0.4 mm nozzles and above | Printing speeds from 50-250 mm/s | Intelligent identification chip supported | Reusable filament spool included The Anycubic PLA Silk Dual Filament in Black Blue is designed for FDM 3D printing enthusiasts who want to elevate their prints with a striking two-tone silk finish. The black and blue colour combination transitions naturally through each layer, giving decorative parts, fan creations, and artworks a sophisticated, premium texture with a smooth silky luster. Compatible with any printer accepting 1.75 mm filament and a 0.4 mm or larger nozzle, it prints at speeds between 50 and 250 mm/s with a recommended nozzle temperature of 210-240 °C and a heated bed temperature of 55-56 °C. By adjusting nozzle temperature and print speed, you can dial in the level of gloss on the finished surface — higher temperatures and slower speeds produce a higher-shine silk effect. The filament also features an intelligent identification chip that works seamlessly with compatible Anycubic printers for automatic print-parameter recognition, and the reusable spool system reduces waste and keeps your workspace tidy. Dry the filament at 55-65 °C for 6-8 hours before use for best results. Features Black Blue colour blend produces a lustrous, metallic silk finish 1kg spool for extended printing sessions and larger projects PLA-based material — easy to print and widely compatible with FDM printers Intelligent identification chip compatible with Anycubic ACE Pro for automatic filament recognition Resilient and flexible — tested to resist breakage during feeding and multi-colour operation Prints at 210-240 °C nozzle temperature; heated bed at 55-56 °C Recommended print speed: 50-250 mm/s Reusable filament spool with threaded locking system to reduce entanglement Specifications Colour: Black Blue Package Weight: 1 kg Dry Out Before Use: Recommended Drying Condition: 55-65℃, 6-8h ACE Compatibility: Compatible Nozzle Size: Recommended 0.4 mm or above Printing Temperature: 210-240 ℃ Heated Bed Temperature: 55-56 ℃ Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 8 mm³/s Density: 1.22 g/cm³ Melt Index: 9±1 g/10 min (190℃/2.16kg) Melting Point Temperature: 164 ℃ Vicat Softening Temperature: 54 ℃ Heat Deflection Temperature (0.45MPa): 53 ℃ Young’s Modulus: 2000±200 MPa Tensile Strength: 37±4 MPa Elongation at Break: 28±5% Bending Modulus: 2400±160 MPa Bending Strength: 66±4 MPa lzod lmpact Strength (X-Y): 20±2 kJ/m² Tensile Strength (Z): 12±4 MPa Filament Type: Aesthetic filaments Recommend to Print: Decorative parts, fandom, artworks Intelligent Identification: Supported Reusable Filament Spool: Supported What's in the Box Anycubic PLA Silk Dual Filament - Black Blue x1